Control Arms, Mega Bite Jr Rear Lower Control Arms, fits 1999 & up Mustangs HPM Mega-Bite Lower Rear Control Arms will give you 135% more traction, When your ready to get serious about putting power to the ground, Then the Mega-Bite is for you, HPM's Mega-Bite series arms are the best on the market and have been for over 15 Yrs. No one - Or Nothing puts more power to the ground than MEGA-BITE! The Mega-Bite Series Rear Lower Control Arms relocate control arm mounting points to alter rear suspension geometry. This changes the anti-squat and anti-dive percentages which provide downforce on the tires. Therefore, traction under acceleration and braking is dramatically improved. Ease of installation was a prime criteria when these products were designed, therefore no welding, drilling, cutting or grinding is required for installation. UHMW spring spacers are included for fine-tuning of ride height. There are two mounting positions for the rear of the control arms. Changing the mounting position will vary the amount of traction available. The top hole will provide an 85% increase in traction over stock and the bottom hole will provide a 135% increase. The length of time that traction is available is roughly inversely proportional to the amount of traction available. The top mounting hole is recommended for most applications and the bottom position is designed mainly for serious drag racing. Testing will show which position is best. Mega Bite arms also help the car launch straighter. This direct bolt-in kit is designed or street, drag or road-race applications. Both ends of these control arms are equipped with fluted polyurethane bushings and bushing back-up washers for durability and longevity. |
